Sony headphone Headphones User Manual


 
26
h. RECORDING FOR VOICE DIALING
Use your phone when recording voice dialing.
1. Press the Names button. Search, SELECT. Press List button.
2. Find a contact name. Press Details button.
3. Press Options button. Add voice tag, SELECT. Instructions appear. Your voice is
automatically saved on the phone after being played back to you.
4. In case you wish to change your recorded voice, press Options button. Voice tags,
SELECT. Change, SELECT. Instructions appear.
5. Continue pressing Back button to exit.
Note: Record your voice command in a quiet place so that only your voice will be recorded on
the phone.
USING WITH NOKIA 8910
a. ACTIVATING THE BLUETOOTH
You must activate your Bluetooth to establish a Bluetooth connection between your mobile
phone and other Bluetooth devices.
1. Press Menu. Scroll to Bluetooth, SELECT. Press SELECT again.
2. Choose On, SELECT. An icon will appear on the upper left corner.
3. Press Back then finally Exit.
QUICK ACCESS:
Press Menu followed by the sequence of numbers below.
Bluetooth Select On Select
8910 10 1 1 1
b. PAIRING TO THE CELLULAR PHONE
1. Bring the cellular phone at about 20 cm from the Car Kit.
2. From the ON state, press the multi-function button for 10 seconds or until a distinctive
three-tone sound will be heard and at the same time, the Bluetooth indicator LED
changes from blinking blue to alternate blinking of red and blue. This indicates that the
unit is now ready for pairing.
3. Press Menu. Scroll to Bluetooth, SELECT and Search for audio accessories, SELECT.
The phone is now scanning for Bluetooth devices. SELECT the Car Kit. The phone will
initiate connection with the Car Kit.
QUICK ACCESS (for step 3):
Press Menu followed by the sequence of numbers below.
Bluetooth Search for audio accessories
8910 10 2
4. Enter 0000 as the passcode then press OK. The volume level will be displayed. The
phone is now connected with the Car Kit.
5. Press Back then Exit to exit the Menu.
The Car Kit is paired and ready to use. An icon will be displayed during the standby mode
indicating that the Car Kit is linked with the phone.
Note: Once paired, the Car Kit and the phone have simultaneous connection with each other.
(Keypad tones will be heard on the Car Kit every time keypad is pressed).