Filter
Top Products
40
d. MAKING A CALL with the Car Kit on
Normal dialing
With your Pocket PC Phone, you can make a call using different methods. Please refer
to your PC Phone’s User Guide.
The most direct method is by using the Phone keypad.
1. Press button to bring up the dialer screen.
2. Tap the number on the keypad, and then tap Talk key.
Note: Ongoing call will be heard on the phone and not immediately on the Car Kit. You
have to press once on the Car Kit’s multi-function button to transfer the sound to the Car
Kit.
3. To terminate the call, press down the multifunction button once.
e. AUDIO TRANSFER
Audio Transfer can be done by pressing the multi-function button once or accessing on the
phone’s Bluetooth Headset ²icon.
USING WITH SHARP GX32
a. ACTIVATING THE BLUETOOTH
You must activate your Bluetooth to establish a Bluetooth connection between your mobile
phone and other Bluetooth devices.
1. Press to display Main Menu.
2. Highlight Settings, and then press to select.
3. Succeedingly, highlight and select Connectivity, Bluetooth, Bluetooth On/Off and
On.
4. Continue pressing Back then finally Exit.
The Bluetooth setting is activated. Bluetooth icon is displayed on standby mode screen.
b. PAIRING TO THE CELLULAR PHONE
1. Bring the cellular phone at about 20 cm from the Car Kit.
2. From the ON state, press the multi-function button for 10 seconds or until a distinctive
three-tone sound will be heard and at the same time, the Bluetooth indicator LED
changes from blinking blue to alternate blinking of red and blue. This indicates that the
unit is now ready for pairing.
3. Press to display Main Menu.
4. Highlight Settings, and then press to select.
5. Succeedingly, highlight and select Connectivity, Bluetooth and Search for Devices.
The phone displays three categories: “Headset”, “Car kit”, and “All”. Choose “Car Kit”.
Note: If you select “All”, the phone lists devices from all categories.
The phone now searches for Bluetooth devices to be paired. When the search is complete,
devices found in the selected category are listed.
6. Highlight the desired device for pairing, and then press to select.
7. Enter “0000” as the passcode then press ok.
8. Continue pressing Back then finally Exit.
The Car Kit is paired and ready to use. Bluetooth icon is displayed during the standby
mode.