Filter
Top Products
56
GB
6 Set the time to stop playback following
step 5.
7 Press . or > repeatedly until the
music source you want appears.
The indications change as follows:
t TUNER y DVD PLAY T
t TAPE PLAY T
8 Press ENTER on the remote.
The type of timer (“DAILY TIMER”),
followed by the start time, stop time and the
music source, appears, then the original
display appears.
9 Turn off the power.
To
Check the setting
Change the setting
Cancel the Daily
Timer
Notes
• If the power is on at the preset time, the Daily
Timer does not work.
• When you use the Sleep Timer, the Daily Timer
will not turn on the system until the Sleep Timer
turns it off.
• The power turns on 15 seconds before the preset
time.
• You cannot activate the Daily timer and the Timer-
recording simultaneously.
Do this
Press CLOCK/TIMER
SELECT on the remote and
press . or > repeatedly
to select “DAILY SELECT?”,
then press ENTER on the
remote.
Start over from step 1.
Press CLOCK/TIMER
SELECT on the remote and
press . or > repeatedly
to select “TIMER OFF?”, then
press ENTER on the remote.
Waking up to music
— Daily Timer
You can wake up to music at a preset time
every day. Make sure you have set the clock
(see “Setting the clock” on page 16).
1 Prepare the music source you want to
play.
• DVD/VIDEO CD/CD/Super Audio CD/
MP3: Load a disc. To start from a
specific track, make a program (see
“Creating your own program” on page
22).
• Tape: Load a tape with the side you
want to play facing forward.
• Radio: Tune in the preset station you
want (see “Listening to the radio” on
page 42).
2 Adjust the volume.
3 Press CLOCK/TIMER SET on the
remote.
“SET” appears.
4 Press . or > repeatedly to select
“DAILY SET?”, then press ENTER on
the remote.
“ON” appears and the hour indication
flashes.
5 Set the time to start playback.
Press . or > repeatedly to set the
hour, then press ENTER on the remote.
The minute indication flashes.
Press . or > repeatedly to set the
minutes, then press ENTER on the remote.
The hour indication flashes again.