Sony NSX-MT320 Stereo System User Manual


 
T-BASS
MANUAL
SELECT
VOLUME
M
DOWN,
E(JP
Turn VOLUME on the main unit, or press VOLUME on the
remote control.
The volume Iewel is displayed as a number from Oto MAX (50).
The volume level is automatically set to
20 when the power is
turned off with the volume level set to 21 or more.
To change the lefth’ight balance
Press MANUAL SELECT on the remote control, UR is displayed
for 2 seconds. Press+ DOWN or - UP on the remote control
within these 2 seconds.
The DOLBY PRO LOGIC front speakers level is also changed.
(See page 17)
SUPER T-BASS SYSTEM
The T-BASS system enhances the realism of low-frequency
sound.
Press T-BASS.
Each time it is pressed, the level changes. Select one of the
three levels, or the off position to suit your preference.
This unit provides the following 3 different programmed
equalization curves.
ROCK: Powerful sound emphasizing treble and bass
POP: More presence in the vocals and midrange
CLASSIC: Enriched sound with heavy bass and fine treble.
PHONES
MULTI
JOG
GEQ
Press GEQ repeatedly until the desired equalization curve
is displayed.
“GRAPHIC EQUALIZER appears (except “GEQ OFF) and
the GEQ mode is displayed cyclically as follows.
r
ROCK— POP CLASSIC— GEQ OFF
(cancel) 1
m
Low frequency sound may be distorted when the T-BASS system
is used for a disc or tape in which low frequency sound is originally
emphasized. In this case, cancel the T-BASS system.
Using the headphones
Connect headphones to the PHONES jack with a standard stereo
plug (@6.3mm, ‘/, inch).
No sound is output from the speakers while the headphones are
plugged in.
When the headphones are plugged in, the DOLBY PRO LOGIC
is canceled.
Sound adjustment during recording
The output volume and tone of the speakers or headphones may
be freely varied without affecting the recording.
7 ENGLISH