Filter
Top Products
Inputs
outputs
Main unit CX-NMT320
FM tuner section
Tuning range
87,5 MHz to 108 MHz
Usable sensivity (IHF) 13.2 dBf
Antenna terminals
75 ohms (unbalanced)
AM tuner section
Tuning range
530 kHz to 1710 kHz (10 kHz step)
531 kHz to 1602 kHz (9 kHz step)
Usable sensitivity 350 pV/m
Antenna
Loop antenna
Amplifier section
Power output
Front
30 W+30W(50Hz -20kHz, THD
less than 1%, 6 ohms)
Rear (Surround)
10 W+ 10 W(I kHz, THD Iessthan
17., 8 ohms)
Center
20 W (1 kHz, THD less than 1%, 8
ohms)
VIDEO/AUX: 150 mV (adjustable)
MIC: 1.8 mV (10 kohms)
SPEAKERS: accept speakers of 6
ohms or more
SURROUND SPEAKERS:
accept speakers of 8 ohms to 16
ohms
CENTER SPEAKER: accept
speakers of 8 ohms or more
PHONES (stereo jack): accepts
headphones of 32 ohms or more
Cassette deck section
Track format 4 tracks, 2 channels stereo
Frequency response 50 Hz -15000 Hz
Recording system
AC bias
Heads Deck 1:Playback head x 1
Deck 2: Recording/playback head
x 1, erase head x 1
Compact disc player section
Laser
Semiconductor laser (L= 780 nm)
D-A converter 1 bit dual
Signal-to-noise ratio 85 dB (1 kHz, O dB)
Harmonic distortion 0.05 % (1 kHz, O dB)
Wow and flutter Unmeasurable
General
Power requirements
120 VAC, 60
Hz
Power consumption 115W
Dimensions of main unit 260 x 330 x 346 mm
(W XHXD) (101/4 x 13x 135/8 in.)
Weight of main unit 6.9 kg (15 Ibs 3
OZ.)
Speaker system SX-NA302
—
Cabinet type
Speakers
Impedance
Output sound pressure level
Dimensions (W x H x D)
Weight
3 way, bass reflex (magnetic
shielded type)
Woofer:
160 mm (6 3/8in.) cone type
Tweeter:
80 mm (3 ‘/4 in.) cone type
Super tweeter:
20 mm (“/i@ in,) ceramic type
6 ohms
87 dBIWlm
240 x 324x 283 mm
(9 ‘/z x 12 7/6x 11
‘/4 in.)
5.2 kg (11 Ibs 7
OZ.)
Specifications and external appearance are subject to change vvithout
notice.
DOLBY PRO LOGIC
Manufactured under license from Dolby Laboratories Licensing
Corporation.
“DOLBY” and “PRO LOGIC” are trademarks of Dolby
Laboratories Licensing Corporation.
COPYRIGHT
Please check the laws on copyright relating to recordings from
discs, radio or external tape for the country in which the machine
is being used.
NOTE
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules, These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help,
CAUTION
Modifications or adjustments to this product, which are not
expressly approved by the manufacturer, may void the user’s
right or authority to operate this product.
ENGLISIH
24