Filter
Top Products
The unit can be turned off automatically at a specified time.
Use the remote control.
1
2
Press SLEEP,
Within 4 seconds, press + or - to specify
the time until the power is turned off.
Each time the button is pressed, the time changes between 5
and 240 minutes in 5-minute stem.,
Specified time
To check the time remaining until the power is turned off
Press SLEEP once. The remaining time is displayed for 4
seconds.
To cancel the sleep timer
Press SLEEP twice so that “SLEEP OFF appears on the display.
* MULTI JOG is also available instead of ++ and W.
— CD DIGITAL OUT
(OPTICAL)
— VIDEO/AUX
—SUPER
WOOFER
Refer to the operating instructions of the connected equipment
for details,
● The connecting cords are not supplied. Obtain the necessaty
connecting cords.
● Consult your local Aiwa dealer for optional equipment.
This
Unit can input analog sound signals through these jacks.
Use a cable with RCA phono plugs to connect audio equipment
(turntables, LD players, MD players, VCRs, TV, etc.).
Connect the red plug to VIDEO/AUX R jack, and the white plug
to VIDEO/AUX L jack.
When connecting a turntable
Use an Aiwa turntable equipped with a built-in equalizer amplifier.
?g,~~,.~w+,~!!~,~~,
%3Ea3s&ZL”.a.aa... ...-..w-aww...h..h.. ==M-BU*.:,GX.. .:;2.W3H
-=- -r —-— ,=!
. . . . ..
CD DIGITAL OUT (OPTICAL) JACK
This unit can output CD digital sound signals through this jack.
Use an optical cable to connect digital audio equipment (DAT
deck, MD recorder, etc.).
Remove the dust cap @ from
CD DIGITAL OUT (OPTICAL)
jack. Then, connect an optical cable plug to CD DIGITAL OUT
(OPTICAL)
jack.
When the CD DIGITAL OUT (OPTICAL) jack is not being
used
Attach the supplied dust cap.
21 ENGLISH