Sony NSX-MT320 Stereo System User Manual


 
3
Press numbered buttons O-9 and +1 Oto program
,g
RANDOM /REPEAT PLAY
Use the remote control.
RANDOM play
All the tracks on the selected disc or all the discs can be played
randomly.
REPEAT play
A single disc or all the discs can be played repeatedly
Press RANDOM/REPEAT.
Each time it is pressed, the function can be selected cyclically.
RANDOM play RANDOM lights up on the display.
REPEAT play G lights up on the display.
RANDOM/REPEAT play RANDOM and G light upon the
display.
Cancel RANDOM and ~ disappear from the display.
To Dlav all discs, press E to start play.
To Plav a sinale disc, press one of DISC DIRECT PLAY 1-3
to
start play.
Uiri33
During random play it is not possible to skip to the previously
played track with -.
Up to 30 tracks can be programmed from any of the inserted
discs.
1
2,3
Use the remote control
1
2
Press PRGM in stop mode.
“PRG” is displayed
Press DISC DIRECT PLAY, then
press numbered
buttons 1-3 within 3 seconds to select a disc.
Go
to the next step when the tray stops rotating.
4
5
Program number
Total playing time c~f
the selected tracks
Repeat steps 2 and 3
to program other tracks.
Press + F to start play.
To check the program
Each time - or PP is pressed in stop mode, a disc number,
track number, and program number will be displayed.
To clear the program
Press
CLEAR in stop mode.
To add tracks to the program
Repeat steps 2 and 3 in stop mode. The track will be programmed
after the last track.
To change the programmed tracks
Clear the program and repeat all the steps again.
To play the programmed tracks repeatedly
After programming the tracks, press RANDOM/REIPEA’r
repeatedly until ~ appears on the display.
During programmed play, you cannot perform random, play,
checking the remaining time, and selecting a disc or track.
ENGLISH 12