Filter
Top Products
The DOLBY PRO LOGIC system which is the biggest feature of
this stereo system provides you with multi channel sound in your
home.
Complete setting and connection of the main unit, supplied
speakers, yourTV and video equipment according to the following
procedure.
Check
@)CX-NMT320 Compact disc stereo cassette receiver
@ SX-NA302 Front speakers
SX-R275
Surround speakers
SX-C605
Center speaker
B
,,,
,!,
D
TS-W35 (For NSX-MT321 only)
Subwoofer
Remote control
AM antenna
Operating Instructions, etc.
FM antenna
=%!!= ..-ssi~=:%:”i”:.:S*-==*SC* *.ux-.sa”,.*A%.:=sJ,~= ~===-”=sh=- .-.-= .s,.,---.~..--..’.- ,. ~-=-.,-. ~----
,-- -- -.-.= ..... . ... ...=* .,..= >---
POSITIONING THE SPEAKERS
To achieve the optimum effects obtainable with the DOLBY PRO
LOGIC system, it is important to position the speakers properly.
Refer to the following illustration to find out the best location in
@)Front speakers
@ Center speaker
Position ;n the center of the two front speakers. In addition,
position on or below the TV set, if connecting a TV set to the
unit.
@ Surround speakers
Place the surround speakers directly to the side of or slightly
behind the listening area. Align them horizontally, about 1
meter (3.2 feet) above ear height.
@ Subwoofer (For NSX-MT321 only)
Place the subwoofer on the floor close to a wall or in a corner
of the room.
m
● No sound is heard frlomthe center and surround speakers when
the DOLBY PRO LOGIC and SURROUND system are set to
off.
● The center speaker sounds only when the DOLBY PRO LOGIC
is set to on.
~,.,,x,q.,m~wz,=w$$,~a~,..~-~.-,lmlw,,,,wwsws-:..:.a&s**w.,*mr,,#4#..,. -,=e..a,.msm*a*~,ws*i8>.=2cLs:.:-
-- .,.-..
CONNECTIONS
Before connecting the AC cord
The rated voltage of your unit shown on the rear panel is
120 V AC. Check that the rated voltage matches your local
voltage.
IMPORTANT
Connect the speakers, antennas, and all optional equipment first.
Then connect the AC cord in the end.
3 ENGLISH