Filter
Top Products
1
2
~–.
—
—.
I
,
MONO
TUNER
0-9,+1o
TUNER
BAND
Press TUNER BAND repeatedly to select the
desired band.
When TUNER BAND is pressed while the power is off, the
power is turned on directly.
Press 44 DOWN or - UP to select a station.
Each time the button is pressed, the frequency changes.
When a station is received, “TUNE is displayed for 2 seconds.
During FM stereo reception, (I{UDI) is displayed.
To search for a station quickly (Auto Search)
Keep + DOWN or - UP pressed until the frequency starts
to change rapidly. After tuning in to a station, the search stops.
To stop the Auto Search manually, press - DOWN or -
UP.
● The Auto Search may not stop at stations with very weak
signals.
When an FM TUNER stereo broadcast contains noise
Press MONO TUNER on the remote control so that “MONO
appears on the display.
Noise is reduced, although reception is monaural.
To restore stereo reception, press MONO TUNER so that “MONO
disappears,
Wk
PRESET
1
0-9,+10
TUNER
BAND
■
MULTI
JOG
The unit can store a total of 32 preset stations. When a station is
stored, a preset number is assigned to the station. Use the preset
number to tune in to a preset station directly.
1
2
Press TUNER BAND to select a band, and press
+ DOWN or - UP to select a station.
Press 11 SET to store the station.
A preset number beginning from 1 in consecutive order for
each band is assigned to the station.
Frequency Preset number
3 Repeat steps 1 and 2,
The next station will not be stored if a total of 32 preset stations
for all the bands have already been stored.
9 ENGLISH