Sony CMT-M373NT Stereo System User Manual


 
Additional Information
65
GB
MD deck section
System Minidisc digital audio
system
Laser Semiconductor laser
(λ=780 nm)
Emission duration:
continuous
Sampling frequency 44.1 kHz
Frequency response 5 Hz – 20 kHz
Tape deck section
Recording system 4-track 2-channel stereo
Frequency response 60 – 10,000 Hz (±3 dB),
using Sony TYPE I
cassettes
Wow and flutter ±0.15% W. Peak (IEC)
0.1% W. RMS (NAB)
±0.2% W. Peak (DIN)
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range
North American model: 87.5 – 108.0 MHz
(100 kHz step)
Other models: 87.5 – 108.0 MHz
(50 kHz step)
Aerial FM lead aerial
Aerial terminals 75 ohms unbalanced
Intermediate frequency 10.7 MHz
AM tuner section
Tuning range
Pan-American model: 530 – 1,710 kHz
(with the tuning interval
set at 10 kHz)
531 – 1,710 kHz
(with the tuning interval
set at 9 kHz)
European model: 531 – 1,602 kHz
(with the tuning interval
set at 9 kHz)
Other models: 530 – 1,710 kHz
(with the tuning interval
set at 10 kHz)
531 – 1,602 kHz
(with the tuning interval
set at 9 kHz)
Aerial AM loop aerial, external
aerial terminal
Intermediate frequency 450 kHz
Speaker
Speaker system 2-way, bass-reflex type
Speaker units
Woofer: 10 cm dia., cone type
Tweeter: 2.5 cm dia., balanced dome
type
Nominal impedance 6 ohms
General
Power requirements
North American model: 120 V AC, 60 Hz
European model: 230 V AC, 50/60 Hz
Korean model: 220 V AC, 60 Hz
Other models: 220 – 240 V AC, 50/60 Hz
Power consumption
European model: 65 W
0.3 W or less (in Power
Saving mode)
Other models: 65 W
Dimensions (w/h/d) incl. projecting parts and controls
Amplifier/Tuner/Tape/MD/CD section:
Approx. 160 × 217 × 345
mm
Speakers: Approx. 140 × 217 × 247
mm
Mass
Amplifier/Tuner/Tape/MD/CD section:
Approx. 5.6 kg
Speakers: Approx. 2.3 kg net per
speaker
Supplied accessories Remote commander (1)
R6 (size AA batteries) (2)
FM wire aerial (1)
AM loop aerial (1)
USB cable (1)
Operating Instructions (1)
M-crew/SonicStage for
Net MD CD-ROM (1)
Warranty (1)
Design and specifications are subject to change
without notice.