Filter
Top Products
Optional Components
53
GB
Listening to a digital component
such as a digital satellite
receiver, etc.
1 Connect the digital optical cord.
See “Hooking up optional components” on
page 52.
2 Press FUNCTION repeatedly until
“OPTICAL IN” appears.
Start playing the connected component.
Listening to an analog
component such as a cassette
deck
1 Connect audio cords.
See “Hooking up optional components” on
page 52.
2 Press FUNCTION repeatedly until
“ANALOG IN” appears.
Start playing the connected component.
Making a digital recording from a
digital component
The Serial Copy Management System (page 64)
may prevent you from making a digital
recording of certain material. In this case,
connect the component to ANALOG IN jacks
and make an analog recording.
1 Connect the digital optical cord.
2 Start recording manually.
See “Recording on an MD manually”
(page 17) or “Recording on a tape manually”
(page 41).
Note
When Smart Space/Auto Cut is set to on, the recording
pauses if no sound continues for 30 seconds or more
(page 20).
Tips
• You can activate Time Machine Recording (page 18).
• You can adjust the recording level when recording on
an MD (page 21).
Making an analog recording from
an analog component
1 Connect audio cords.
2 Start recording manually.
See “Recording on an MD manually”
(page 17) or “Recording on a tape manually”
(page 41).
Tip
You can select the “PC” function when recording on a
tape.
Listening to audio from a
connected component
Recording with optional
components and this
system