Sony CMT-M373NT Stereo System User Manual


 
Sound Adjustment/Timer
43
GB
You can wake up to music at a preset time. Make
sure you have set the clock (see “Setting the
clock” on page 6).
You can perform this operation only using the
remote.
1 Prepare the sound source you want to
play.
CD: Load a disc. To start from a specific
track, make a program (see “Creating
your own program” on page 8).
MD: Load an MD. To start from a
specific track, make a program (see
“Programming MD tracks” on page 12).
Tape: Load a tape (see “Playing a tape”
on page 40).
TUNER: Tune in the preset radio station
(see “Listening to the radio” on page 37).
2 Press VOL + or – to adjust the volume.
3 Press CLOCK/TIMER SET.
4 Press . or > repeatedly until
“DAILY SET?” appears, then press
ENTER/YES.
5 Set the time to start playing.
Press . or > repeatedly to set the
hour, then press ENTER/YES.
The minute indication flashes.
Press . or > repeatedly to set the
minute, then press ENTER/YES.
6 Set the time to stop playing following
the same procedure as step 5.
7 Press . or > repeatedly until the
desired sound source appears.
Each time you press the button, the display
changes cyclically as follows:
8 Press ENTER/YES.
The start time, the stop time, the sound
source and volume appear in turn, before
the original display returns.
9 Press ?/1 to turn off the system.
Other operations
Notes
The Daily Timer setting or the Timer Recording
setting overlaps with part or all of another timer
setting.
If you use the Daily Timer and the Sleep Timer at the
same time, the Sleep Timer has priority.
Do not operate the system from the time the system
turns on until the play starts (about 30 seconds before
the preset time).
If the system is on about 30 seconds before the preset
time, the Daily Timer will not be activated.
You cannot use the optional component connected to
ANALOG IN jacks or DIGITAL OPTICAL IN jack
as the sound source for Daily Timer.
When the Daily Timer is set to “OFF”, “TIMER
SEL?” does not appear. However, “TIMER SEL?”
does appear when the Timer Recording is set to
“ON”.
Waking up to music
—Daily Timer
t
TUNER
y
CD PLAY
T
t
TAPE PLAY
y
MD PLAY
T
To Do this
Check the settings/
activate the timer/
cancel the timer
1 Press CLOCK/TIMER
SELECT.
2 Press . or >
repeatedly until “TIMER
SEL?” appears, then press
ENTER/YES.
3 Press . or >
repeatedly until “DAILY
ON?” or “DAILY OFF?”
appears, then press ENTER/
YES.
Change the setting Start over from step 1. If you
made a mistake, press
TCURSOR in step 5 to 7 to
select the setting you want to
change, then change the setting.
Cancel both Daily
Timer and Timer
Recording
1 Press CLOCK/TIMER
SELECT.
2 Press . or >
repeatedly until “TIMER
OFF?” appears, then press
ENTER/YES.