Sony BKDF- 702 Stereo System User Manual


 
1-53
DFS-700/700P
Chapter 4 Advanced Operations
Chapter 4 Advanced Operations
4-15
8
When you have added all the key frames, press the EDIT button.
The button goes off, and the user program effect is resaved with the
added key frames.
Deleting a key frame
Deleting a key frame (before deletion)
After carrying out the procedure to step 4 in the section “To recall a user
program effect” on the page 4-12, use the following procedure.
5
Press the UP or DOWN button in the pattern/numeric keypad, so that
the number of the key frame you want to delete (key frame 3 in the
example above) appears in the EDIT display window.
6
Press the DEL button. (To prevent you from inadvertently deleting a
key frame, you must hold the button down for at least 0.5 seconds.)
An alarm sounds, and the key frame you specified in step 5 is deleted.
The number of key frames shown in the STATUS display window
decreases by 1.
Deleting a key frame (after deletion)
Repeat steps 5 and 6 as required to delete more key frames.
A
1
B
2
C
3
D
4
E
5 6
7 8
Example: Deleting key frame 3
Undefined key frames
STATUS display window = 5
EDIT display window = 3
Key frame to delete
A
1
B
2
D
3
E
4 5
6 7 8
Example: Deleting key frame 3
Undefined key frames
STATUS display window = 4
EDIT display window = 3
(continued)
Chapter 4 Advanced Operations
4-14
Chapter 4 Advanced Operations
User Program Effects
Adding a key frame
Adding a key frame (before addition)
After carrying out the procedure to step 4 in the section “To recall a user
program effect” on the page 4-12, use the following procedure.
5
Press the UP or DOWN button in the pattern/numeric keypad, so that
the number of the key frame before where you want to insert the new
frame (key frame 3 in the example above) appears in the EDIT display
window.
6
Set the parameters in the menu.
7
Press the LAST X/INS button.
This inserts a new key frame with the parameters you set in step 6 after
the key frame specified in step 5, and the number of key frames shown
in the STATUS display window increases by 1.
Adding a key frame (after addition)
Repeat steps 5 to 7 as required to add more key frames.
C’
A
1
B
2
C
3
D
4
E
5 6
7 8
Example: Adding a key frame after key frame 3
Undefined key frames
STATUS display window = 5
EDIT display window = 3
A
1
B
2
C
3
C'
4
D
5 6 7
8
E
Example: Adding a key frame after key frame 3
Undefined key frames
STATUS display window = 6
EDIT display window = 4