Filter
Top Products
SETTING NEW EQUALIZATION CURVES
MANUALLY
Up to four equalization curves can be stored as the manual
modes M1-M4.
MI-M4
PRGM/
MANUAL
1
2
3
4
5
Press FREQUENCY UP or FREQUENCY DOWN
to select a frequency.
The level indicator of the selected frequency flashes.
Turn MULTI JOG to adjust the level of the selected
frequency.
Repeat steps 1 and 2 to make the desired
equalization curve.
Within 4 seconds, press ENTER.
MEMORY is displayed for 8 seconds.
Within 8 seconds, press one of the graphic
equalizer preset buttons Ml -M4.
The equalization curve is stored.
The equalization curve has been memorised to Ml.
To select a manual-preset GEQ
1 Press PRGM/MANUAL to select the manual mode. One of
the MANUAL indicators is selected.
2 Press one of the graphic equalizer preset buttons M1-M4.
To
cancel the selected mode
Press the selected button again. “GEQ OFF is displayed.
The DSP (Digital Signal Processor) SURROUND adjusts the
reverb level and delay time to give a resonant surround sound
during playback, allowing you to enjoy the real sound presence
of different environments.
This unit has been programmed with 4 different DSP
SURROUND modes. You can also create and store up to 4 of
your own surround settings.
~-–=-=-..—_-–---
( ——.—4
When you select the programmed DSP SURROUND mode, the
scmnd presence of a disco (DISCO), live music performance
(LIVE), movie theater (MOVIE) or concert hall (HALL) can be
obtained.
Press PRGM/MANUAL so that one of the PRGM indicators
is selected, then press one of the DSP buttons.
PRGM indicator
Equalization curves are selected automatically to match the DSP
modes and can also be selected or turned off to suit your
preference.
When the music source is monaural
Select LIVE or MOVIE to obtain a simulated stereo effect, When
DISCO or HALL is selected, no sound will be heard from the
surround speakers.
To cancel the selected mode
Press the selected DSP button again. “DSP OFF is displayed.
ENGLISH 8