Filter
Top Products
4
2
8
1
3,7
m aI
5
Programmed edit function enables CD recording while checking
the remaining time on each side of the tape as the tracks are
programmed.
The programmed edit recording will not start from a point halfway
in the tape. The tape must be recorded from the beginning of
either side.
1
2
3
4
5
Insert the tape into deck 2, and press DOLBY NR
to turn Dolby NR on or off.
Insert the tape with the side to be recorded on first facing out
from the unit.
Press CD and load the disc(s).
Press CD EDIT/CHECK twice.
EDIT lights up and “PRGM” flashes on the display.
When using the remote control, press EDIT/CHECK twice.
PRGM
When “Al” is displayed, press CD EDIT/CHECK again.
Press +
or -to designate the tape length.
10 to 99 minutes can be specified.
● The numbered buttons O-9 or MULTI JOG are also
available to designate the tape length.
Maximum recording
Tape length
Tape side (A)
time for side A
I I
Press DISC DIRECT PLAY, then press numbered
buttons 1-5 within 3 seconds on the remote
control to select a disc. Then press numbered
buttons O-9 and +1 O to program a track.
Example: To select the 10th track of disc 2, press DISC
DIRECT PLAY and numbered button2, then press numbered
buttons +1Oand O.
d Repeat step 5 for the rest of the tracks for side A.
A track whose playing time is longer than the remaining time
cannot be programmed,
Selected track number
Sele~ted disc P;ogram number
number
Remaining time Pr~grammed
of side A tracks
7 Press CD EDIT/CHECK to select side B and
program the tracks for side B.
After confirming Bon the display, repeat step 5.
8 Press
Tape side B (reverse side)
● REC/REC MUTE to start recording.
The tape is rewound to the beginning of the front side, the
lead segment is played through for 10 seconds, and recording
starts. When recording on the front side (A) ends, recording
on the back side (B) starts.
To stop recording
Press h. Recordin~ and CD play stop simultaneously.
To check the order of the programmed track numbers
❑
Before recording, press CD EDIT/CHECK to select side A or B,
and press < or - repeatedly or turn MULTI JOG.
Disc number Program number
Track number
Programmed track numbers
To change the program of each side
Press CD EDIT/CHECK to select side A or B, and press
■
CI.EAR to clear the program of the selected side. Then program
tracks again.
Tc) clear the edit program
Press
■ twice so that “EDIT disappears on the display.
Em
● Recording is inhibited if the erasure prevention tab on either
side of the tape is broken off.
● l-he edit function cannot be used with discs containing 31 tracks
c}rmore.
ENGLISH 18