Filter
Top Products
e&-a*xa*am!-mam&F&.&.2mm$%wea&mmmeA.Ya&a.E--*mm.m**se-
SETTING A NEW DSP SURROUND SOUND
4 Within 8 seconds, press ENTER .
MANUALLY
“MEMORY” is displayed for 8 seconds.
Select one of the elements to be set for a new
DSP sound.
Delay time (TM)
Increasing the number in the display increases the delay time
and surround effect.
Press DELAY.
0~15s20*30 *50+-+140
Feedback (FB)
Increasing the number in the display increases the echo effect.
Press EFFECT twice.
FBOFF~l~2*----+6~7
Input mode (IN L-R, IN L+R)
When “L+R” is displayed,
the surround effect increases,
especially in the center.
When “L-R is displayed, it increases on the outside.
Press EFFECT once.
Within 8 seconds, turn MULTI JOG to select one
of the levels of the selected element in step 1.
Repeat steps 1 and 2 to make the desired DSP
sound.
ENGLISH
5 Within 8 seconds, press one of the DSP (M1-M4)
buttons.
The new DSP sound is stored.
The DSP sound has been memorized to Ml
To select a manual-preset DSP
1 Press PRGM/MANUAL of DSP to select the manual mode.
One of the MANUAL indicators.is selected.
2 Press one of the DSP (Ml -M4) buttons.
To cancel the selected mode
Press the selected DSP button again. “DSP OFF is displayed.
m
When the MIC or ECHO level is changed, the DSP SURROUND
mode is automatically canceled.