Filter
Top Products
55
GB
Other Operations
x Before pairing
Sound transmission is established by the ID
(example).
x After pairing
Sound transmission is established between the
paired S-AIR main unit and S-AIR sub unit(s)
only.
1 Place the S-AIR sub unit that
you want to pair near the S-AIR
main unit.
Note
Remove headphones from the surround
amplifier (if connected).
2 Match the IDs of the S-AIR main
unit and the S-AIR sub unit.
• To set the ID of the S-AIR main unit,
see “To set the ID of the S-AIR main
unit” (page 54).
• To set the ID of the S-AIR sub unit,
refer to the operating instructions
supplied with the S-AIR sub unit.
3 Press AMP MENU.
4 Press V/v repeatedly to select
“S-AIR”.
5 Press or b to enter the
menu.
6 Press V/v repeatedly to select
“PAIRING”.
7 Press or b to enter the
parameter.
8 Press V/v repeatedly to select
the setting you want, then
press .
• START: The S-AIR main unit starts
pairing.
• CONDIN: you can check the current ID.
When the pairing setting is timed out,
“NO PAIR” appears in the display.
9 Start pairing of the S-AIR sub
unit.
xFor the surround amplifier
Refer to the operating instructions
supplied with surround amplifier.
xFor the S-AIR receiver
Refer to the operating instructions
supplied with S-AIR receiver.
10Pairing completed.
“COMPLETE” appears in the display.
To exit the menu
Press AMP MENU.
ID A
ID A
ID A
ACTIVE STANDBY
INPUT SELECTOR
MASTER VOLUME
?/1
Your room
S-AIR main unit
S-AIR sub unit S-AIR sub unit
Neighbor
ID A
ID A
ID A
ACTIVE STANDBY
INPUT SELECTOR
MASTER VOLUME
?/1
Your room
S-AIR main unit
S-AIR sub unit S-AIR sub unit
Neighbor
No transmission
Pairing
continued