Filter
Top Products
15
GB
Getting Started
For the surround speakers of
HT-SF360
For the front and surround
speakers of HT-SS360
3 Hang the speakers on the
screws.
Notes
• Use screws that are suitable for the wall material
and strength. As a plaster board wall is especially
fragile, attach the screws securely to a beam and
fasten them to the wall. Install the speakers on a
vertical and flat wall where reinforcement is
applied.
• Contact a screw shop or installer regarding the
wall material or screws to be used.
• Sony is not responsible for accident or damage
caused by improper installation, insufficient wall
strength or improper screw installation, natural
calamity, etc.
• For HT-SF360, if you install the speakers on the
wall, you do not need to attach the supplied
speaker stand.
2: Connecting the
speakers
Before connecting the cords, be sure to
disconnect the AC power cord (mains lead).
AFront speaker (left)
BFront speaker (right)
CCenter speaker
DSurround speaker (left)
ESurround speaker (right)
FSubwoofer
5 mm to 7 mm
100 mm
5 mm to 7 mm
4.6 mm
10 mm
Rear of speaker
SPEAKERS
CENTER
SUBWOOFER
FRONT L SUR R SUR LFRONT R
E
B
ASpeaker cord (supplied)
A
A
Connector
CF
D
A
A
continued