Filter
Top Products
98
GB
3 Press V/v to select “ Settings,” then
press or b.
4 Press V/v to select “Speaker,” then
press or b.
5 Press V/v to select “Speaker Pattern,”
then press .
6 Press V/v to select the appropriate
speaker pattern so that there are no
surround back speakers.
7 Press RETURN/EXIT O.
8 Press V/v to select “Sur Back Assign,”
then press .
9 Press V/v to select “BI-AMP,” then
press .
The same signals output from the FRONT
SPEAKERS A terminals can be output
from the SURROUND BACK SPEAKERS
terminals.
Notes
•You cannot use the FRONT SPEAKERS B
terminals for a bi-amplifier connection.
•When you use the auto calibration function, make
the bi-amplifier settings before you perform auto
calibration.
•If you make the bi-amplifier settings, the speaker
level, balance, and equalizer settings of the
surround back speakers become invalid, and those
of the front speakers are used.
•Signals output from the PRE OUT jacks are used
with the same settings as those of the SPEAKERS
terminals.
•If the Speaker Pattern is set to the setting that there
are surround back speakers, you cannot make the
bi-amplifier settings.