Filter
Top Products
118
GB
The following options are available in each menu.
“xx…” in the table signifies the parameter for each item.
Menu list (in the display window)
Menu Item Parameter Initial
setting
Auto Calibration AUTO CAL START?
5 4 3 2 1
MEASURING: TONE
MEASURING: T.S.P.
MEASURING: WOOFER
COMPLETE
[xxxxxxxxxx]
RETRY, SAVE EXIT, WRN CHECK,
PHASE INFO, DIST. INFO,
LEVEL INFO, EXIT
SAVE
EXIT
WARNING CODE [xxx:4x] FL, FR, C, SLA, SRA, SLB, SRB, SBL,
SBR : 0, 1, 2, 3, 4
NO WARNING
ERROR CODE [xxx:3x] F, SR, SB : 0, 1, 2, 3, 4
RETRY? [xxxx] YES, EXIT YES
CANCEL
CAL TYPE [xxxxxxxxx] ENGINEER, FULL FLAT,
FRONT REF, OFF
FULL
FLAT
POSITION [xxxxxxxx] POS.1, POS.2, POS.3 POS.
1
NAME IN ? [xxxxxxxx]
Level Settings TEST TONE [xxxxxxxx] OFF, L to SW (AUTO), L to SW (FIX) OFF
PHASE NOISE [xxxxxxx] OFF, L/C, C/R, R/SL, R/SR, SR/SL,
SR/SBR, SBR/SBL, SBL/SL, SL/L,
L/SR
OFF
PHASE AUDIO [xxxxxxx] OFF, L/C, C/R, R/SL, R/SR, SR/SL,
SR/SBR, SBR/SBL, SBL/SL, SL/L,
L/SR
OFF
FRONT L [xxx.xdB] –10.0dB to +10.0dB (0.5dB step) 0dB
FRONT R [xxx.xdB] –10.0dB to +10.0dB (0.5dB step) 0dB
CENTER [xxx.xdB] –20.0dB to +10.0dB (0.5dB step) 0dB
SURROUND L [xxx.xdB] –20.0dB to +10.0dB (0.5dB step) 0dB
SURROUND R [xxx.xdB] –20.0dB to +10.0dB (0.5dB step) 0dB
SUR BACK [xxx.xdB] –20.0dB to +10.0dB (0.5dB step) 0dB
SUR BACK L [xxx.xdB] –20.0dB to +10.0dB (0.5dB step) 0dB
SUR BACK R [xxx.xdB] –20.0dB to +10.0dB (0.5dB step) 0dB
SUB WOOFER [xxx.xdB] –20.0dB to +10.0dB (0.5dB step) 0dB
D. RANGE COMP. [xxx] OFF, AUTO, STD, MAX AUTO