Sony 3-875-814-21(1) Stereo Receiver User Manual


 
112
GB
Figure 1
z : Video signals are converted and output through the video converter.
a : The same type of signal as that of the input signal is output. Video signals are not converted.
– : Video signals are not output.
a)The resolution is set automatically, depending on the connected monitor.
b)When the TV is connected to jacks other than the HDMI jacks, 480i/576i signals are output when
“Resolution” is set to “AUTO.”
c)480p/576p signals are output even if 480i/576i is set.
d)Video signals without copyright protection are output based on the settings menu. Video signals with
copyright protection are output as 480p.
Notes
•Video signals are not output from the COMPONENT VIDEO MONITOR OUT or MONITOR VIDEO OUT
jacks when the monitor, etc., is connected to HDMI OUT jacks.
•If you select a resolution that the connected TV does not support in the “Resolution” menu, the images from
the TV cannot be output correctly.
•Converted HDMI image output signals do not support “x.v.Color.”
•Converted HDMI image output signals do not support Deep Color.
“Resolution”
menu setting
HDMI OUT jacks MONITOR
COMPONENT
VIDEO OUT jacks
MONITOR VIDEO
OUT jack
DIRECT Component video a
Composite video a
AUTO
(initial setting)
Component video
z
a)
z
b)
z
b)
Composite video z
b)
z
b)
480i/576i Component video z
c)
zz
Composite video z
c)
zz
480p/576p Component video zz
Composite video zza
720p, 1080i Component video zz
d)
Composite video zz
d)
a
1080p Component video za
Composite video z a
Input signals
Output from