Filter
Top Products
108
GB
Multi Zone settings
You can make settings for the main zone, zone
2 or zone 3.
Turning the power on or off for
zone 2/zone 3
You can turn zone 2 or zone 3 operation on or
off. “Main” (this receiver) is always selected.
You cannot turn it off.
1 Press V/v to select the zone you want
to turn on or off, then press .
2 Press V/v to select “ON” or “OFF,” then
press .
x ON
x OFF
Selecting the output source for
each zone
You can select the source that is output to the
zone. Audio and video signals are output to
zone 2, while only audio signals are output to
zone 3.
1 Press V/v to select the zone to which
you want to output audio/video signals,
then press .
2 Press B/b to select “Input,” then press
.
3 Press V/v to select the input, then
press .
Adjusting the volume for
zone 2/zone 3
You can adjust the volume in the main zone.
If “Sur Back Assign” is set to “ZONE2” in the
Speaker settings menu, you can also adjust the
volume of zone 2.
1 Press V/v to select the zone for which
you want to adjust the volume, then
press .
2 Press B/b to select “Volume,” then
press .
3 Press V/v to adjust the volume, then
press .
Selecting the criteria for output
of signals to control each zone
You can turn the receiver on or off in another
zone, or select various options for use of the
12V Trigger function.
1 Press V/v to select the zone you want,
then press .
2 Press B/b to select “12V Trigger,” then
press .
3 Press V/v to select the parameter, then
press .
x OFF
Lets you turn off output of 12V triggers even
when the main receiver is turned on.
x CTRL
Lets you turn the output of 12V triggers on or
off manually using the CIS command of the IR
remote.
x ZONE
Lets you turn the output of 12V triggers on or
off based on whether the selected zone is
turned on or off.
x INPUT (for “Main” only)
Lets you turn on the output of 12V triggers
when the preset input is selected.
When you select “Input,” the setting display
which sets each input trigger to on/off appears.
Multi Zone Setup