Filter
Top Products
80
GB
Adjusting the Delay
Between the Picture and
Sound
(A/V SYNC)
When the sound does not match the pictures on
the TV screen, you can adjust the delay between
the picture and sound.
1 Press SYSTEM MENU.
2 Press X/x repeatedly until “A/V SYNC”
appears in the front panel display, then
press or c.
3 Press X/x to select a setting.
• “LONG”: adjusts the difference between
picture and sound by 130 msec.
• “SHORT”: adjusts the difference between
picture and sound by 70 msec.
•“OFF”
: does not adjust.
4 Press .
The setting is made.
5 Press SYSTEM MENU.
The system menu turns off.
Note
• Depending on the input stream, “A/V SYNC” may
not be effective.
Changing the Input Level
of the Sound
Distortion may occur when you listen to a
component connected to the TV (AUDIO IN)
jack on the control unit. Distortion is not a
malfunction and will depend on the component
connected.
To prevent distortion, reduce the input level on
the control unit.
1 Press FUNCTION repeatedly until “TV”
appears in the front panel display.
2 Press SYSTEM MENU.
3 Press X/x repeatedly until
“ATTENUATE” appears in the front
panel display, then press or c.
4 Press X/x to select a setting.
• “ATT ON”: You can attenuate the input
level. The output level is changed.
• “ATT OFF”: Normal input level.
5 Press .
The setting is made.
6 Press SYSTEM MENU.
The system menu turns off.
X/x/c,
SYSTEM
MENU
X/x/c,
SYSTEM
MENU
FUNCTION