Filter
Top Products
Sound Adjustment
51
GB
4 Press .
The selected decoding mode is applied.
5 Press SYSTEM MENU.
The system menu turns off.
To turn the surround effect off
Select “2CH STEREO” for “DEC. MODE” and set the sound mode (page 52) to “MOVIE” or
“MUSIC.”
Note
• The surround effect might be difficult to hear depending on the type of source signals (e.g., digital stereo signals,
digital multi signals, etc.) except for DVD multi-channel signals.
• You cannot select the decoding mode when the control unit is reading the files in the USB device or transferring
songs.
• Depending on the input stream, the decoding mode may not be effective.
• The surround effect is canceled when the sound mode is set to “SPORTS.”
Ti
p
• The system memorizes the last decoding mode selected for each function mode.
Whenever you select a function such as “DVD” or “FM,” the decoding mode that was last applied to the function
is automatically applied again when it is returned to. For example, if you listen to “DVD” with “AUTO” as the
decoding mode, then change to another function, and then return to “DVD,” “AUTO” will be applied again.