Filter
Top Products
25
GB
Getting Started
After connecting the AC power cord (mains lead), the demonstration appears in the front panel display.
To set the demonstration mode to on/off
1 Press [/1.
The system turns on.
2 Press SYSTEM MENU on the remote.
3 Press X/x repeatedly until “DEMO” appears in the front panel display, then press or
c.
4 Press X/x to select a setting.
•“DEMO ON”: On.
• “DEMO OFF”: Off.
5 Press .
The setting is made.
6 Press SYSTEM MENU.
The system menu turns off.
Ti
p
• When you purchase the system from new, or if the system is at its factory default settings (page 88), you can turn
off the demonstration simply by pressing [/1 on the remote.
About the demonstration