Filter
Top Products
25
How to Operate the MVP841
after a CD has been loaded. It will not start
automatically.
2. When the player is in Standby Mode, the power will
automatically turn on when the OPEN/CLOSE push-
button is pressed and the disc tray will open. If a
DVD/CD disc is loaded and the player is in Standby
mode, press the PLAY push-button to turn power on
and start the disc playing. Certain DVDs will require
you to make an initial selection of Screen Format as
well as Sound Format. These selections will override
any similar selections made with the MVP841 Setup
Menus.
Resume Play Mode
The MVP841 has a built-in Play/Resume feature. This al-
lows you to stop playing a disc at any time, and resume lis-
tening/viewing where you left off when play was stopped.
1. To activate Resume/Play, press STOP once. The disc
time at that instant will be memorized.
2. Press PLAY again and it will resume playing from the
time where you had previously stopped playing.
3. If the player is put in Standby Mode by pressing the
Standby/On push-but-
ton, Play/Resume
memory will be re-
tained. Press PLAY
again and the player will
turn on and resume play
at the time you left off.
Note: If the disc tray is
opened, the MVP841
Front Panel Power
Switch is turned off,
or the power cord is
unplugged, the
Resume Play memory
will be erased.
DVD Disc Pause/Still
Frame
This feature allows you to
pause during disc play. You
can also cycle forward or
backward through a disc,
one video picture frame at a
time, and at different speeds.
Refer to figure 25.
1. When playing a DVD
Disc, press the PAUSE
push-button to temporarily stop play. After PAUSE has
been activated, each additional time you press PAUSE
the disc will advance one video frame at a time.
Note: In this mode, press either the FF or REV push-buttons
to move more rapidly forward or backward a frame at a
time on a DVD.
2. Press the PLAY push-button to cancel Pause and re-
sume playing a DVD.
CD Disc Pause
When playing a CD Disc, press PAUSE to temporarily stop
play. Press the PLAY push-button to cancel Pause and re-
sume playing.
DVD/CD Disc REV and FF
This feature allows rapid backward or forward (REV or
FF) disc play. In the Setup Menu, you have the option of
turning Audio On or Off during the fast play operation. Re-
fer to figure 26.
1. Press a REV (Reverse) or FF (Fast Forward) push-but-
ton to move rapidly backward or forward through a
disc. Press the same push-button again up to three
times, and the search speed will increase successively.
An Icon will appear indicating the direction and speed
of the fast operation.
2. Cancel the REV or FF mode by pressing the PLAY
push-button and normal play will resume.
Figure 25
Figure 26