Filter
Top Products
19
How to Set FL Display
SETUP, cont
The MVP841 front panel display, just below the disc tray,
can be adjusted to be Bright or Dim.
Note: If a disc is loaded, the player must be in STOP mode
before any SETUP operation can occur. The other front
panel nomenclature is fixed and will not affected by the
Display adjustment operation.
1. Press the SETUP push-button to access the initial setup
menu.
2. Press push-button Number 5 to select the FL Display
(Front panel Display Brightness Menu). Bright will be
indicated, which is the factory default setting. See fig-
ure 13.
1. Press 1 to select Bright.
2. Press 2 to select Dim.
After a selection is made, the initial setup menu will reap-
pear. If all setup adjustments are complete, press push-but-
ton Number 0 to exit the Initial Setup Menu.
Figure 13
Figure 12b
1. Press 1 to select On.
2. Press 2 to select Off.
Change Color and Position
Press push-button Number 2 to select the Color and Posi-
tion Menu. See figure 12b.
1. Press 1 to select Blue, top of screen.
2. Press 2 to select Violet, top of screen.
3. Press 3 to select Green, top of screen.
4. Press 4 to select Blue, middle of screen.
5. Press 5 to select Violet, middle of screen.
6. Press 6 to select Green, middle of screen.
After a selection is made, the Initial Setup Menu will reap-
pear. If all setup adjustments are complete, press push-but-
ton Number 0 to exit the Initial Setup Menu.
Figure 12a