Filter
Top Products
10
1. Select either Component Video Output or the Compos-
ite Video / S-Video Outputs with the VIDEO OUTPUT
SELECTOR SWITCH located on the rear panel of the
MVP841.
Note: In order to produce the best picture quality available
from DVD Discs today, it was necessary to optimize the
circuitry for either the Component Video Output or the
Composite Video / S-Video Outputs which is switch
selectable.
2. Connect an S-Video Cable from the MVP841 S-
VIDEO OUTPUT to the DVD S-VIDEO INPUT on a
McIntosh MX132 A/V Control Center.
3. Connect a video cable from the MVP841 Composite
VIDEO OUTPUT to the CR12 V-AUX Video Input.
Connect a video cable from the CR12 V-AUX VIDEO
OUTPUT to the MX132 DVD Composite DVD
VIDEO INPUT.
How to Connect Video and AC Power
How to Connect Video and AC Power
Note: If a McIntosh CR12 is not used then connect MVP841
Composite VIDEO OUTPUT to the MX132 DVD
Composite DVD VIDEO INPUT.
4. If you have a TV/Monitor and/or other Video Compo-
nent with Component Video Inputs then connect as fol-
lows:
A. Connect a video cable from the MVP841 Y OUT-
PUT to the Y Component Video Input of the TV/
Monitor or other video component.
B. Connect a video cable from the MVP841 P
B
OUT-
PUT to the P
B
Component Video Input of the TV/
Monitor or other video component.
C. Connect a video cable from the MVP841 P
R
OUT-
PUT to the P
R
Component Video Input of the TV/
Monitor or other video component.
5. Connect the MVP841 power cord to a live AC outlet.
Connect to
AC Outlet
McIntosh Multizone Controller
McIntosh A/V Control Center
TV/Monitor