Filter
Top Products
23
To Connect the Home Dock to Your Powered Speakers
The Home Dock can be connected directly to a pair of speakers. The speakers
will need to be powered for amplification.
1 Connect the 1/8” (3.5 mm) connector from the powered speakers
to the green AUDIO connector at the rear of the Home Dock.
2 Plug the AC Power Adapter for the speakers into an
AC outlet.
3 Turn the speakers On.
Dock Your XMp3i
Place the XMp3i into the Home Dock as shown, and turn it On
by sliding the Power/Lock switch down.
IMPORTANT! Allow the XMp3i to charge the battery for a
minimum of three hours before removing from the Home Dock.