Filter
Top Products
88
RS232 Mode
When RS232 Mode is turned On, the Tuner accepts control via the RS-232 port.
When the Tuner is in RS232 mode, the display will show “232” in the lower-right
corner and most of the buttons on the Tuner and remote control will be disabled.
The MENU button which can be used to turn the RS232 mode Off. (Refer to
“RS-232 Communications Port Information” on page 26 for more information about
RS232 Mode).
To Turn On the RS232 Mode:
3 Select RS232 Mode from the
menu options.
4 Select On.
5 Press ENTER to place the Tuner
into RS232 mode.
If there is no RS232 connection, or there
is a problem with the RS-232 connection,
the screen will display “Check RS232
Connection”. (Figure 20)
RS232 Mode
Off
On
Figure 19
077 Broadway
Check RS232 Connection
JzStndrd 232
Figure 20
Menu Options