Filter
Top Products
23
Infrared (IR) Connection Information
The IR input on the rear of the Tuner is a 12 volt mono 1/8” mini plug. The tip
is signal and the sleeve is ground.
The following table lists the IR codes that are accepted by the SR-H2000
Tuner.
SR-H2000 NEC Codes for Infrared Remote Controls
NEC Custom Code: 0x01FE
Zone 1 Direct: 0x42BD
Zone 2 Direct: 0x1CE3
Button NEC Command Code
0 0x1D
1 0x10
2 0x11
3 0x12
4 0x14
SLEEVE
TIP