Filter
Top Products
38
Jump
The Tuner has a special feature called JUMP. This button can be programmed to
jump to a channel which is accessed frequently and temporarily such as traffic,
weather, news, or sports. This button allows you to quickly tune to a specific
channel and then tune back to the original channel by pressing the button again.
Refer to “Jump Settings” on page 70 for information on configuring the JUMP
button.
If JUMP is set to Traffic, pressing the JUMP button will take you to your stored
traffic channel. If your traffic report is not immediately available, the band
indicator on the display will change to the jump icon (
) to indicate a jump is
active. Once your local traffic report is ready, the tuner will automatically tune to
your stored traffic channel. You may have to wait a few minutes for your desired
report.
Pressing the JUMP button while the tuner is searching will cancel the search.
Pressing the JUMP button after the tuner has tuned to your traffic report will
return to the channel to which you had been listening immediately prior to
Figure 6
Operation