Sim2 Multimedia HT300 Link Home Theater System User Manual


 
24
MEMORIES
The main parameters of the image may be saved in distinct
groups of values (known as Memories); these parameters can
subsequently be applied all together by way of a single com-
mand.
There are 3 distinct Memories (Memory 1, Memory 2, Memory
3) for each of the 25 signal types managed:
making a total of 75 different available Memories.
The image parameters that can be saved/recalled by the Memo-
ries management system are the following:
Image Picture
BRIGHTNESS ASPECT
CONTRAST COLOR TEMP. GAIN (R/G/B)
COLOR COLOR TEMP. GAIN OFFSET (R/G/B)
TINT COLOR TEMP.
SHARPNESS OVERSCAN
FILTER GAMMA
SHARPNESS MODE
VIDEO TYPE
NOISE REDUCTION
Some of these parameters may not be available for certain in-
puts or certain input signals, as indicated in Tables 4 and 5.
The menu page for the Memories management functions is
activated by pressing the
key on the remote control or the
key on the keypad
(Fig.28).
ZOOM
F1
E
2005
Fig.28
The operations that can be performed on each memory se-
lected are described here below.
SAVE A MEMORY
To save the current values of the image parameters in Memory
1, use the and keys to move to line 1 and then open the
pull-down menu by pressing the key
(Fig.29)
. Then select
the option Save current settings. To confirm that the operation
has been completed successfully, the message Current set-
tings saved in Memory 1 is displayed at the bottom of the screen
and the letter S appears to the left of the memory name. The
same procedure is used to save parameters in Memories 2
and 3.
0 Auto
3 S MEMORIA 1
Memories
Save current settings
Save initial settings
Rename
2 I
1 S
Fig.29
RECALL A MEMORY
To recall a Memory, select the desired line and press . The
parameters saved in the selected Memory will be applied to
the image displayed and a message will appear to confirm the
operation Memory 1 recalled. The Memory recalled will be
associated with the source and signal type, and will be auto-
matically recalled every time that particular source and signal
type combination is selected.
5 COMP/RGB(YCrCb 15KHz) 5 COMP/RGB(RGB 15KHz)
6 COMP/RGB(YCrCb 15KHz)
6 COMP/RGB(RGB 15KHz)
5 COMP/RGB(YCrCb 32KHz) 5 COMP/RGB(RGB 32KHz)
6 COMP/RGB(YCrCb)
6 COMP/RGB(RGB)
7 COMP/RGB(YCrCb 15KHz) 7 COMP/RGB(RGB 15KHz)
8 COMP/RGB(YCrCb 15KHz)
8 COMP/RGB(RGB 15KHz)
7 COMP/RGB(YCrCb) 7 COMP/RGB(RGB)
8 COMP/RGB(YCrCb)
8 COMP/RGB(RGB)
9 GRAPHICS RGB
11 DVI-D (RGB)
12 HDMI
1 VIDEO
2 VIDEO
10 GRAPHICS RGB
11 DVI-D (YCrCb)
3 S-VIDEO
4 S-VIDEO