Filter
Top Products
16
Inputs
1 VIDEO 1
2 VIDEO 2
3 S-VIDEO 3
4 S-VIDEO 4
5 COMP/RGB 5
6 COMP/RGB 6
7 COMP/RGB 7
8 COMP/RGB 8
9 GRAPH RGB 9
10 GRAPH RGB 10
11 DVI-D 11
12 HDMI 12
1
2
3
4
5 YCrCb 32kHz
6 RGBS 15kHz
7 YCrCb
8 YCrCb 15kHz
9
10
11 YCrCb
12
Inputs
1
2
3
4
5 YCrCb 32kHz
6 RGBS 15kHz
7 YCrCb
8 YCrCb 15kHz
9
10
11 YCrCb
12
RGBS 15kHz
RGBS
YCrCb 15kHz
YCrCb
1 VIDEO 1
2 VIDEO 2
3 S-VIDEO 3
4 S-VIDEO 4
5 COMP/RGB 5
6 COMP/RGB 6
7 COMP/RGB 7
8 COMP/RGB 8
9 GRAPH RGB 9
10 GRAPH RGB 10
11 DVI-D 11
12 HDMI 12
Fig. 18a
Fig. 18b
8 ON SCREEN MENU
Input 11 is capable of receiving YCrCb or RGB signals coming
from DVI-D sources.
The selection should be made from the drop menu following
the indications described above.
After selecting the source signal (by means of the and
keys), press MENU+/MENU - to confirm and close the pull-
down menu; the value you have just set will be displayed on
the right of the < symbol.
As with the other inputs, you can now select the input just set
by pressing the key.
During the short time it takes to find the signal, a box appears
showing the signal requested. As soon as the signal is shown
in the box additional information is displayed concerning the
video standard (for video signals) or resolution (for graphic
signals), and format.
Fom the
SETUP
menu it is possible to choose to visualize or not
this information, for more details check the “
SOURCE
INFORMATION
” in “
MENU
” section.
INPUTS
The input selection menu (Inputs) is called by pressing 0 on
the remote control and, when no other menu is displayed, using
the and keys on the keypad. To select an input, scroll the
list with the and keys until the desired input is highlighted,
then press .
Display of the input selection menu is terminated
by pressing the ESC key, or when the time allowed for displaying
the on-screen menu has lapsed (set in the Set-up Menu).
Input 5 can accept RGB and YCrCb signals with a scan
frequency up to 32Khz.
Inputs 6, 7 and 8 can receive RGB and YCrCb signals, at 15
kHz, 32 kHz or higher. The association between the input and
the type of signal is made from the pull-down menu that appears
on the right of the < symbol after pressing the key
(Fig. 18b)
.
All system functions can be activated from the keypad or remote control with the aid of a practical and comprehensive system of
on screen menus.