Filter
Top Products
ENGLISH
40
■Note :
• You cannot select the speakers set to “NO”.
• You cannot set the distance within the range of 0.1 ~ 9.0 meters in 0.1 meter intervals.
When selecting the SPEAKER DISTANCE
1. Press the CURSOR UP/DOWN buttons to select the “DISTANCE”, then press the ENTER button.
2. Press the CURSOR UP/DOWN buttons to select the desired speaker.
4. Repeat the above steps 2 and 3 until the distances are all set as desired.
3. Press the CURSOR LEFT/RIGHT buttons to set the selected speakers as desired.
■About the speaker distance
When enjoying multi-channel surround playback with Dolby Digital and DTS sources, etc., it is ideal that the center, surround,
surround back and subwoofer speakers should be the same distance from the main listening position as the front speakers.
By entering the distance between the listening position and each speaker, the delay times of center, surround, surround back
and subwoofer speakers are automatically adjusted to create an ideal listening environment virtually as if the center,
surround, surround back and subwoofer speakers were at their ideal locations respectively.
• Then “L ~” will be displayed.
R-904(G)_ENG_091014:R-904(G) 2009-11-11 오후 12:05 페이지 40