Filter
Top Products
ENGLISH
16
• If removing all punch-through functions is performed
successfully, the LED will flicker twice.
Using a punch-through function
This remote control may be programmed to operate either
the AUDIO volume punch-through or the TV volume and/or
TV channel punch-through in conjunction with any of the 8
components controlled by this remote control.
For example, since this receiver will likely be used as the
sound system while watching TV, you may want to adjust
this receiver’s volume although this remote control is set to
control the TV.
• When programming this remote control for the AUDIO
volume punch-through, press and hold down both “AVR”
button and “VOLUME +” button for more than 1 second.
• If programming is performed successfully, the SET LED
will flicker twice.
•
When you want either TV volume or TV channel
punch-through, press and hold down both “TV” button
and either “VOLUME +” or “CH ∧” button for more
than 1 second.
■Note :
• If you use one of AUDIO and TV volume punch-
through functions, you cannot use the other.
■Removing a punch-through function
• When removing the AUDIO volume punch-through, press
and hold down both “AVR” button and “VOLUME -” button
for more than 1 second.
• If removing is performed successfully, the LED will flicker
twice.
•
When you want to remove either TV volume or TV
channel punch-through, press and hold down both “TV”
button and either “VOLUME
-
” or “CH ∨” button for
more than 1 second.
■Removing all punch-through functions
Press and hold down both “AVR” button and “AUDIO
ASSIGN” button for more than 1 second.
R-904(G)_ENG_091014:R-904(G) 2009-11-11 오후 12:05 페이지 16