Sherwood R-904 Stereo Receiver User Manual


 
ENGLISH
22
ENJOYING SURROUND SOUND
Notes:
• Before surround playback, first perform the speaker setup procedure, etc. on the SETUP menu for optimum performance.
(For details, refer to “SETTING THE ROOM EQ” on page 36 and “SETTING THE SPEAKER SETUP on page 37.)
Select the desired surround mode.
• Press the SURROUND MODE UP/DOWN (〉/〈)buttons to select a surround mode or press the STEREO button to select
the stereo mode.
• Each time the SURROUND MODE UP/DOWN (〉/〈)buttons are pressed, the surround mode changes as follows :
Auto surround mode : The truest possible playback mode will be automatically selected according to the number of
channels in the signal being input.
Manual surround mode : You can select the desired of different surround modes selectable for the signal being input.
(“AUTO” indicator lights up)
(“AU
TO
” i
n
d
i
c
a
to
r g
o
e
s
o
ff)
• Depending on surround back speaker setting, some surround modes can be selected or not as follows:
< >: Possible only when surround back speaker is not set to "NO".
[ ] : Possible only when surround back speaker is set to "NO".
( ) : Possible only when surround back speaker is set to “X2”.
Note :
• When the SPEAKER button is set to off, only the stereo mode can be selected.
S
ignal format being input
Dolby Digital Plus sources,
Dolby TrueHD sources,
Dolby Digital EX 6.1 channel sources
Dolby Digital 5.1 channel sources
Dolby Digital 2 channel sources
DTS-HD High Resolution Audio sources,
DTS-HD Master Audio sources,
DTS ES Discrete 6.1 channel sources,
DTS ES Matrix 6.1 channel sources,
DTS 96/24 sources
DTS sources
PCM 2 channel sources,
PCM multi-channel sources,
Analog stereo sources,
Selectable surround mode
AUTO SURROUND, corresponding DOLBY mode, STEREO
AUTO SURROUND, <DOLBY DIGITAL EX, DOLBY D+PLIIx MUSIC>, (DOLBY D+ PLIIx MOVIE),
[DOLBY DIGITAL], STEREO
AUTO SURROUND, <DOLBY PLIIx MOVIE, DOLBY PLIIx MUSIC, DOLBY PLIIx GAME>, [DOLBY PLII
MOVIE, DOLBY PLII MUSIC, DOLBY PLII GAME], DOLBY PRO LOGIC, STEREO
AUTO SURROUND, corresponding DTS mode, STEREO
AUTO SURROUND,<DTS+NEO:6, DTS+PLIIx MUSIC>, (DTS+PLIIx MOVIE), [DTS], STEREO
AUTO SURROUND, <DOLBY PLIIx MOVIE, DOLBY PLIIx MUSIC, DOLBY PLIIx GAME>, [DOLBY PLII
MOVIE, DOLBY PLII MUSIC, DOLBY PLII GAME], DOLBY PRO LOGIC, MOVIE, DRAMA, GAME,
STADIUM, CLASSIC, HALL, MULCH CH STEREO, STEREO
• You can adjust the different sound parameters for optimum surround effect.
When adjusting the sound parameters
• The “EQ ~ “ or (“L.SYNC ~ “, etc.) is displayed for several
seconds.
• If the parameter mode disappears, press this button again.
1. Press the SOUND PARAMETER button.
R-904(G)_ENG_091014:R-904(G) 2009-11-11 오후 12:05 페이지 22