Filter
Top Products
ENGLISH
33
System Setup
• The setup menu is displayed on the fluorescent and allows you to perform the setup procedures easily. In most situations, you will
only need to set this once during the installation and layout of your home theater, and it rarely needs to be changed later.
The setup menu consists of 4 main menus; SYSTEM, SET ROOM EQ, SPEAKER SETUP and MULTI ROOM SETUP.
These menus are then divided up into various sub-menus.
1. Turn the setup menu on.
2. Select the desired menu using the CURSOR UP/DOWN buttons.
• The setup menu will be shown.
• To turn the menu off, press this button again.
■Notes:
• When the VuNow is selected as an input source, the
system setup cannot be performed.
• When selecting “SYSTEM”, see “SETTING THE
SYSTEM” on page 35.
• When selecting “SET RMEQ”, see “SETTING THE
ROOM EQ” on page 36.
• When selecting “SPK SET”, see “SETTING THE
SPEAKER SETUP” on page 37.
• When selecting “MLT ROOM”, see “SETTING THE
MULTI ROOM SETUP” on page 41.
3. Confirm your selection.
R-904(G)_ENG_091014:R-904(G) 2009-11-11 오후 12:05 페이지 33