Filter
Top Products
ENGLISH
26
Adjusting the current channel level
• After adjusting each channel level with test tone, adjust the channel levels either according to the program sources or to suit
your tastes. (For details, refer to “When selecting the CHANNEL LEVEL” on page 39.)
• Each time this button is pressed, the channel is selected as
follows:
→ L → C → R → SR → (SBR → SBL)
SW ← SL ←
( ) : Possible only when the surround back speaker is set to
2ch (“x2”) or 1ch (“x1”)
• When the channel level disappears, press this button
again.
• Depending on the speaker settings (“NO”), etc., some
channels cannot be selected.
• The channel levels can be adjusted within the range of
-15 ~ +15 dB.
■Note:
• When selecting the VuNow as an input source, you
cannot adjust the channel levels.
2. Adjust the level of the selected channel as desired.
3. Repeat the above steps 1 and 2 to adjust each channel level.
1. Select the desired channel.
Front Center Front Surround Surr. Back Surr. Back
Left Right Right Right Left
Subwoofer Surround Left
R-904(G)_ENG_091014:R-904(G) 2009-11-11 오후 12:05 페이지 26