Sharp SD-AT1000W Home Theater System User Manual


 
E-29
SD-AT1000W_LAG_E5.fm04/7/21
SD-AT1000W
ENGLISH
TINSZA121AWZZ
Advanced Features
- Timer and sleep operation -
Timer and sleep operation (continued)
" Setting the sleep timer
You can set the unit to the power stand-by mode at the specified time.
Caution:
This unit cannot set the sleep timer of other equipment.
To use the sleep timer using other equipment, you should also set the timer on
the equipment separately.
To confirm the remaining sleep time:
! The remaining sleep time is displayed for about 10 seconds.
! You can change the remaining sleep time whilst it is displayed by pressing the
ENTER button (steps 3 - 4).
To cancel the sleep operation:
Press the ON/STAND-BY button whilst "SLEEP" is indicated.
To cancel the sleep operation without setting the system to the stand-by mode, pro-
ceed as follows.
" To use timer and sleep operation together
You can fall asleep and wake up to the radio.
1
During playback, press the TIMER button.
2
Within 10 seconds, press the or button to
select "SLEEP SET", and press the ENTER
button.
3
Press the or button to select the time.
(Maximum: 2 hours - Minimum: 1 minute)
! 2 hours - 5 minutes 5-minute intervals
! 5 minutes - 1 minute 1-minute intervals
4
Press the ENTER button.
"SLEEP" will appear.
5
The unit will enter the power stand-by mode automatically after the
preset time has elapsed.
The volume will be turned down 1 minute before the sleep operation finishes, and
then you cannot change the volume.
1 Whilst "SLEEP" is indicated, press the TIMER button.
2 Within 10 seconds, press the or button to select "SLEEP".
1 Press the TIMER button.
2 Within 10 seconds, press the or button to select "SLEEP OFF", and press the
ENTER button.
1
Set the sleep timer (steps 1 - 4).
Sleep operation starts.
2
Set the timer playback.
("Setting the timer" on page 27, steps 1 - 7)
Remaining sleep time
Sleep timer setting
Timer playback setting
Timer playback
starts.
Timer playback will
automatically stop.
Sleep operation will
automatically stop.
Sleep operation
starts.
Desired time1minute - 2hours
Start time Finish time
1 minute - 2 hours
1
2