Filter
Top Products
E-10
SD-AT1000W_LAG_E2.fm04/7/21
SD-AT1000W
ENGLISH
TINSZA121AWZZ
2
3
4
5
6
7
8
1
System connections
- Speaker connection / Aerial connection -
" Connecting speaker wires
To prevent accidental short circuit between and terminals, connect the
speaker wires to the speakers first then to the unit.
Caution:
! The supplied speakers are exclusively for SD-AT1000W. Do not connect
them to other equipment, and do not connect other speakers to SD-
AT1000W. It may cause malfunction.
! Do not mistake the and , and right and left terminals of the speaker leads. (The
right speaker is placed on the right when you face the unit.)
Aerial connection
Notes:
! Placing the aerial on the unit or near the AC power lead may cause noise pickup.
Place the aerial away from the unit for better reception.
! When static is still heard even after adjusting the position of the AM loop aerial, try
reversing the wire connections.
Installing the AM loop aerial:
External FM or AM aerial:
Use an external FM or AM aerial if you require better reception. Consult your dealer.
When using an external AM aerial, be sure to keep the wire of the AM loop aerial
connected.
Make sure to leave the AC power lead disconnected when connecting the
speakers.
! Do not let the bare speaker wires touch each other.
! Do not stand or sit on the speakers. You may be injured.
! Insert the speaker plug fully with the rising side facing up.
! Hold the speaker plug when removing it from the main unit.
Pulling the lead may cause malfunction to the unit.
Incorrect
1 Connect the wires to the speakers.
2 Connect the other end to the main unit.
Speaker terminals
Speaker plug
Plug in with the rising
side facing up.
Label
Label
Tube
Red
Black
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS
socket and position the FM aerial wire in the di-
rection where the strongest signal can be re-
ceived.
Supplied AM loop aerial:
Connect the AM loop aerial wire to the AM and
GND terminals. Position the AM loop aerial for
optimum reception. Place the AM loop aerial on
a shelf, etc., or attach it to a stand or a wall with
screws (not supplied).
< Assembling > < Attaching to the wall >
Wall Screws (not supplied)
White
Black
FM aerial
AM loop
aerial
External FM aerial
External AM aerial
15 m (49 feet)
7.5 m (25 feet)
AM loop
aerial
Earth wire
Earth rod
SD-AT1000W(LAG) TINSZA121AWZZ
3