Filter
Top Products
E-26
SD-AT1000W_LAG_E4.fm04/7/9
SD-AT1000W
ENGLISH
TINSZA121AWZZ
2
3
4
5
6
7
8
1
Advanced Features
- Adjusting speaker delay/speaker level -
Step 2. Speaker level setting
If sounds from the speakers are uneven, you can equalise them by adjusting the
speaker levels.
Notes:
! If subwoofer sound is distorted, lower the subwoofer level.
! You can also adjust the speaker level of a subwoofer connected to the SUB-
WOOFER PRE OUT socket.
Step 3. Test tone
After adjustments, check the speaker sound by listening to the test tone. (You can
readjust the volume level.)
Step 4. To end the speaker setting
1
Press the AMP SET UP button, and the or button to select "SP
LEVEL". Then press the ENTER button.
2
Within 10 seconds, press the or button to select the desired
speaker.
3
Within 10 seconds, press the or button to adjust the level.
! You can adjust the level at 1 dB intervals.
! To adjust the levels of other speakers, repeat the operation from step 2.
Speaker type Level range Default setting
FL Front speaker (Left) - 6 dB to + 6 dB 0 dB
CT Centre speaker - 6 dB to + 6 dB 0 dB
FR Front speaker (Right) - 6 dB to + 6 dB 0 dB
SR Surround speaker (Right) - 6 dB to + 6 dB 0 dB
SL Surround speaker (Left) - 6 dB to + 6 dB 0 dB
SW Subwoofer - 10 dB to + 10 dB + 6 dB
1
Press the AMP SET UP button, and the or button to select
"TONE". Then press the ENTER button.
Speakers emit the test tone for 2 seconds in turn, starting with the front speaker
(left).
2
Readjust the speaker levels if not equal.
Whilst the test tone sounds, press the or button to adjust the level.
You can select a speaker by pressing the or button.
When you complete the settings, press the AMP RETURN button
twice.
FL CT FR
SW SL SR
SD-AT1000W(LAG) TINSZA121AWZZ
5