Sharp BD-MPC41U Home Theater System User Manual


 
66
Dynamic Volume
You can adjust the Dynamic Volume level.
Press DYNAMIC VOL once.
The current Dynamic Volume level is displayed.
Press a/b within 3 seconds to adjust the
desired mode as the below indicated.
OFF
MEDIUM
HEAVY
LIGHT
The switched Dynamic Volume level is displayed on
the TV screen for approximately 3 seconds.
Off
Off
Medium
Heavy
Light
MEDIUM: Dynamic Volume is set to a moderate level.
Recommended for listening to movies with
volume variations.
HEAVY: Dynamic Volume is set to a heavier level.
Recommended for late-night listening
when high volume is not required. (When
the sound mode is set to “NIGHT”, the
Dynamic Volume level is set to “HEAVY”
automatically.)
LIGHT: Dynamic Volume is set to a lighter level.
NOTE
When the “Dynamic Range Control” function (page 69) is
effective in DISC function, the “Dynamic Volume” function
is ineffective.
1
2
Audio Settings and Operations
Dynamic EQ
You can adjust the Dynamic EQ offset level.
Press DYNAMIC VOL twice continuously.
The current Dynamic EQ offset level is displayed.
Press a/b within 3 seconds to adjust the
desired offset as the below indicated.
0 dB
5 dB
10 dB
15 dB
0 dB (Film Ref): This is the default setting and should
be used when listening to movies.
5 dB: Select this setting for content that has a very
wide dynamic range, such as classical music.
10 dB: Select this setting for jazz or other music
that has a wider dynamic range. This setting
should also be selected for TV content as that
is usually mixed at 10 dB below film reference.
15 dB: Select this setting for pop/rock music or
other program material that is mixed at very
high listening levels and has a compressed
dynamic range.
Fine-tuning the subwoofer level
The subwoofer level can be adjusted.
Press SUB WOOFER.
The current subwoofer level is displayed on the front
display panel.
Press a/b within 3 seconds to adjust the
desired level.
Adjust the level from -5 to +5.
Fine-tuning the center speaker level
The center speaker level can be adjusted.
Press CENTER LEVEL.
The current center speaker level is displayed on the
front display panel.
Press a/b within 3 seconds to adjust the
desired level.
Adjust the level from -5 to +5.
1
2
1
2
1
2