Sharp BD-MPC41U Home Theater System User Manual


 
40
Testing the speaker settings
Adjust the volume to 30 before testing the audio level.
(Page 41)
Press a/b/c/d to select “Test Start”, then
press ENTER.
A test tone is outputted from each speaker in the
following order.
LCRRSLSSW
0dB
SW
10ft/0dB
L
LS
8ft/0dB
RS
8ft/0dB
10ft/0dB
C
10ft/0dB
R
Test Start Finish Return
To select a speaker to be tested, press a/b/c/d to
select the speaker while the test tone is output.
To stop the test tone, select “Test Tone Stop”.
Adjusting the level
When the sound volume level of each speaker is
uneven, adjusting the level separately.
Press a/b/c/d to select the speaker with the
setting you want to adjust, then press ENTER.
To select the speaker outputting the test tone, press
ENTER.
Press c/d to select “Level”.
Press a/b to adjust the desired level, then
press ENTER.
Repeat from steps 11 to 13 for each speaker.
10ft/0dB
L
RS
8ft/0dB
10ft/0dB
C
10ft/0dB
R
0dB
SW
LS
8ft/0dB
10ft 0dB
Distance Level
Return
Completing the settings
Press a/b/c/d to select “Finish”, then press
ENTER.
Press HOME or EXIT to exit.
10
11
12
13
14
15
16
Before Starting Playback