Sharp BD-MPC41U Home Theater System User Manual


 
21
Connection and Setup
Positioning the Speaker System
To mount the Surround Speakers on the wall
ε
Screw fixed on the wall
Decide and make marks where to fix the screws
on the wall in horizontal or vertical position as
bellow.
4-1/8
"
(105 mm)
4-1/8
"
(105 mm)
(Horizontal position) (Vertical position)
Make holes by using a drill according to the
marks you have put in step1.
1-9/16
"
(40 mm)
3/8
"
(8-9 mm)
Wall surface
Fix a wall mount plug into the hole using a
hammer until it is flush with the wall surface.
1-9/16
"
(40 mm)
3/8
"
(8-9 mm)
Wall surface
Tighten the screws.
Wall surface
Wall surface
Screw
(commercially available)
1/4
"
(6 mm)
1
2
3
4
ε
Installing the Surround Speaker
Before installing the speaker, connect the speaker
connection cords to the speaker. (See pages 22-23.)
Hook the speaker on the screw heads and make sure
to properly secured.
Wall surface
Wall surface
Speaker cable
Speaker cable
(Vertical position)
(Horizontal position)