Sharp BD-MPC41U Home Theater System User Manual


 
41
Preparations and Basic Operations
POWER
VOLUME
control
OPEN/CLOSE
SELECTOR
Loading a Disc
Press POWER to turn on the power.
Press OPEN/CLOSE to open the disc tray.
Load a disc on the disc tray.
Insert the disc with the label face up.
In case of disc recorded on both sides, face down the
side to play back.
Press OPEN/CLOSE to close the disc tray.
Playback may begin automatically, depending on the
disc.
Input Selection
Changing the input selection on
the main unit
You can change the input source using SELECTOR.
Each time SELECTOR is pressed, the input source
changes as follows:
DISC
DIGITAL 1
DIGITAL 2
ANALOG
TUNER
iPod
1
2
3
4
Changing the input selection with
the remote control
The operation buttons vary depending on the input
mode.
Pressing BD/AUX changes the input mode as follows.
DISC DIGITAL 1 DIGITAL 2 ANALOG
To change the FM input mode, press FM.
FM (STEREO) FM (MONO)
To select the iPod mode, press iPod/I.
Volume Adjustment
Adjusting the volume
Main unit operation:
When the VOLUME control is turned clockwise, the
volume will increase.
When it is turned counterclockwise, the volume will
decrease.
Remote control operation:
Press VOL+ to increase the volume and VOL- to
decrease the volume.
Muting the sound
The sound is muted temporarily when pressing MUTE
on the remote control.
*1
*2
*1 flashes for 3 seconds, and then the “Function”
(status display) appears.
*2 The elapsed time is displayed during disc playback.
The mute function is canceled when you adjust the volume.
Basic Operations