Filter
Top Products
62
Miscellaneous
OPERATING YOUR TV WITH THE REMOTE CONTROL
Press the POWER button to turn on the TV.
Press the AMP/TV button to set the remote to TV mode.
If you select the AMP mode, the button will fl ash orange.
If you select the TV mode, the button will fl ash green.
Point the remote control toward the TV.
While holding down the POWER button, enter the code corresponding to your brand of TV.
If there is more than one code listed for your TV in the table, enter one at a time to determine which code
works.
If the code matches the TV's code, the TV will be turned off.
If TV is turned on or off when you press the POWER button of the remote control, the setting is completed.
You can use the TV POWER, VOLUME, CHANNEL, MENU and Numeric buttons (0~9).
The remote control may not work on some brands of TVs. Also, some operations may not be possible
depending on your brand of TV.
The remote control will work with Samsung TVs by default.
1.
2.
•
•
3.
4.
•
•
5.
•
M
- HW-C900-XAA_0831.indd 62 - HW-C900-XAA_0831.indd 62 2010-08-31 6:22:332010-08-31 6:22:33