Filter
Top Products
47
ENG
● SETUP
SETTING TONE CONTROL
This will enable you to adjust the bass and treble level.
Press the SETUP/MENU button on the remote control.
Each time the button is pressed, the mode switches between SETUP
ENTER and SETUP OFF.
Press the ENTER button to select SETUP ENTER.
Press the
▲▼
buttons to select TONE CONTROL, and then press the
ENTER or
►
button.
Press the
▲▼
buttons to select the option you want, and then press the
ENTER or ► button.
Each time you press this button, TONE BASS TREBLE will be
selected in turn.
Press the
▲▼
buttons to set the Tone Control mode you want.
If it is set to TONE OFF, the Tone Control function will be disabled.
You can adjust it from -6 to +6dB by 1 step.
The sound gets quieter at -6dB and louder at +6dB.
- To exit setup mode -
Press the SETUP/MENU button on the remote control.
SETUP OFF appears on the display and Setup Mode is exited.
The Tone Control function can be applied to all channels except for the subwoofer.
1.
•
2.
3.
4.
•
5.
•
•
•
•
M
Æ
Æ
SETTING NEO:6 MODE
You can play back 2 channel sound over 7.1 channels when enjoying music or a movie.
Press the SETUP/MENU button on the remote control.
Each time the button is pressed, the mode switches between SETUP
ENTER and SETUP OFF.
Press the ENTER button to select SETUP ENTER.
Press the
▲▼
buttons to select NEO:6 SETUP, and then press the
ENTER or
►
button.
Press the
▲▼
buttons to set the C-IMAGE mode you want.
You can set C-IMAGE from 0 to 5
This parameter adjusts the center image through the front and center
speakers. "5" is the wider.
- To exit setup mode-
Press the SETUP/MENU button on the remote control.
SETUP OFF appears on the display and Setup Mode is exited.
Using NEO:6 mode
Press the NEO:6 button on the remote control.
MUSIC :
When listening to music, you can experience sound effects as if you are listening to the actual
performance.
CINEMA : Adds realism to the movie soundtrack.
OFF : Output the original signal as it is without applying the sound fi eld effect or any other sound effect.
NEO:6 works only for 2-ch audio signals with sampling frequencies of 32KHz, 44KHz or 48KHz.
1.
•
2.
3.
4.
•
•
•
•
M
Æ
Æ
- HW-C900-XAA_0831.indd 47 - HW-C900-XAA_0831.indd 47 2010-08-31 6:22:262010-08-31 6:22:26