Filter
Top Products
33
ENG
●
BASIC FUNCTIONS OF YOUR AV RECEIVER
BEFORE USING THE AV RECEIVER
Turning On/Off
Connect the power plug to the outlet.
This unit will set to Standby mode.
Press the POWER button on the main unit for 2 seconds.
This unit will be turned on.
You can also turn the unit on/off by pressing the POWER button on the remote control.
Remote control functions
You can operate your AMP (this AV receiver)/ TV and BD(Samsung only)/DVD player with this remote control.
See pages 62 ~ 64 for more details.
To select a function
Method 1
Press the INPUT SELECT button.
Each time you press this button, FM ➝ BD/DVD ➝ SAT ➝ TV ➝ VCR ➝ CD ➝ AUX1 ➝ AUX2
➝ 7.1 MULTI CH ➝ IPOD AUDIO ➝ IPOD VIDEO will be selected in turn.
Method 2
Press the TUNING/CH, BD/DVD, SAT,
TV/AUX1, CD, MULTI CH, VCR/AUX2 or iPod button.
You can directly select the desired function.
BASICS OF ZONE2
When the ZONE2 speaker is connected properly, turn on the main unit and use MULTI ZONE2 in the front panel
or MAIN/ZONE button on the remote control to select ZONE2.
Press POWER to turn on the ZONE2 feature, and use INPUT SELECT CONTROL to select a source that you
want to output to ZONE2.
You can also use the INPUT SELECT on the main unit.
The mode function as follows :
FM ➝ BD/DVD ➝ SAT ➝ TV ➝ VCR ➝ CD ➝ AUX 1
However, you cannot listen to one FM program in the main zone and a different program in the sub zone.
The SETUP menu will be disabled in ZONE2 mode.
•
•
•
•
1.
2.
M
Basic functions of your AV Receiver
- HW-C900-XAA_0831.indd 33 - HW-C900-XAA_0831.indd 33 2010-08-31 6:22:212010-08-31 6:22:21