Filter
Top Products
Maintenance and Troubleshooting
RS-900 and RS1100 Series Installation/Operation Manual 71
PRE
L
IMINAR
Y
LAMP LED lights solid red. • The lamp has failed or
exceeded its usage life.
• Replace the lamp with a
new one.
TEMP LED lights solid red. • RS-900/RS1100 internal
temperature is too high or
one or more fans have
failed.
• Power off the
RS-900/RS1100 and allow
it to cool down. Ensure
that the intake and exhaust
vents are not blocked.
Turn the projector back
on. If the problem persists,
please contact your Runco
dealer for assistance.
Table 5-1. Troubleshooting Chart (continued)
Symptom Possible Cause(s) Solution